TNG® Offering the widest range of standard mechanical seal from any compnay anywhere.
Categories
- Conical Spring Mechanical Seals
- Parallel Spring mechanical Seals
- Multiple Spring mechanical Seals
- Wave Spring Mechanical Seal
- Metal Bellows mechanical seal
- Cartridge mechanical seal
- PTFE-Bellows Seal
- Parallel Spring Diaphragm Mechanical Seal
- Elastomeric Bellows mechanical seal
- Brand Pump Seals-General Industrial
- Brand Pump Seals-Food and Beverage Industry
- Stationary seat Type
TG109
EagleBurgmann Type MG1 Replacement
TG109 series is the most common rubber bellows mechanical seals allow for fast and easy installation. it is also be used as multiple seal in tandem mechanical seals in two sets arrangement. Mechanical Seal Type TG109 is widely used in Chemical standard pumps, screw pumps, slurry pumps and Petroleum chemical industry
TG109 series is the most common rubber bellows mechanical seals allow for fast and easy installation. it is also be used as multiple seal in tandem mechanical seals in two sets arrangement. Mechanical Seal Type TG109 is widely used in Chemical standard pumps, screw pumps, slurry pumps and Petroleum chemical industry
Detail Information
Features
Compact design in the rubber
Insensitive to shaft play and run out
Bellows should not twist due to spring drive
Single seal, unbalanced, single spring
Conform with DIN24960 EN12756 standard
Recommended Applications
Water and waste water technology
Petroleum chemical industry
Industrial pumps
Slurry pumps
Process pumps
Other Rotating Equipment
Operating range
Shaft diameter: d1=8...100 mm
Pressure: p=-0.1...1.6Mpa（-14.5psi....232psi）
Temperature: t = -20 °C ..+140 °C(-4°F to 284°F)
Sliding velocity: Vg≤10m/s（32.80ft/m）
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials
Product Structure
Combination Materials
1.Rotary Face
Carbon graphite resin impregnated Ak
Hot-Pressing carbon Ac
Silicon carbide (RBSIC) O
2.Stationary Seat
Aluminium oxide(Ceramic) B
Silicon carbide (RBSIC) O
Tungsten carbide W1
3.Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Ethylene-Propylene-Diene (EPDM) E
4.Spring
Stainless Steel (SUS304) F
5.Metal Parts
Stainless Steel (SUS304) F
Product Variants
TG1092
Burgmann mechanical seal MG12 replacement
TG1092
Dimensions and structure same as for TG109,
but with an extended bellows tail.the working
length conform with EN12756 standard.Stationary
seat with T1G60 as standard, T3G6 also available.
TG1093
Burgmann mechanical seal MG13 replacement
TG1093
Dimensions and structure same as for TG109,
but with an extended bellows tail.the working
length conform with EN12756 standard.
Stationary seat with T1G60 as standard,
T3G6 also available.
TG109K
Burgmann mechanical seal MG1S20 replacement
TG109K
Dimensions and structure same as for TG109,
but with an extended bellows tail. installation
Interchangeable with TG560K（UK Standard).
Stationary seat with T1G50 as standard.
Stationary Seat
Standard Stationary Seat: T1G60
T1G60 equivalent to Burgmann G60 Seat
Alternatives Stationary Seat: T3G6 T3G4 T1G50
T3G6 equivalent to Burgmann G6 Seat
T3G4 equivalent to Burgmann G4 Seat
T1G50 equivalent toBurgmann G50 Seat
Review
- Loading...
Please send your message to us
If you have any questions please ask here. TNG® needs the contact information you provide to us to contact you about our products and services. For information on our privacy practices and commitment to protecting your privacy.
- Tel
- *Title
- *Content
Do you need any further information?
Please send your message to us
If you have any questions please ask here. TNG® needs the contact information you provide to us to contact you about our products and services. For information on our privacy practices and commitment to protecting your privacy.
- Tel
- *Title
- *Content