TNG® Offering the widest range of standard mechanical seal from any compnay anywhere.
Categories
- Conical Spring Mechanical Seals
- Parallel Spring mechanical Seals
- Multiple Spring mechanical Seals
- Wave Spring Mechanical Seal
- Metal Bellows mechanical seal
- Cartridge mechanical seal
- PTFE-Bellows Seal
- Parallel Spring Diaphragm Mechanical Seal
- Elastomeric Bellows mechanical seal
- Brand Pump Seals-General Industrial
- Brand Pump Seals-Food and Beverage Industry
- Stationary seat Type
TG113
O-Ring pusher mechanical seals
O-Ring pusher construction and single mechanical seal type TG113 allows short axial installation length， with easy to install and reliable transmission characteristic. It is ideal for use in General corrosion applications such as chemical pumps , sewage pumps and industrial pumps.
O-Ring pusher construction and single mechanical seal type TG113 allows short axial installation length， with easy to install and reliable transmission characteristic. It is ideal for use in General corrosion applications such as chemical pumps , sewage pumps and industrial pumps.
Detail Information
Features
O-Ring pusher construction
Two forms in the Spring adaptor (Anti-rotating Pin and set screw).
Single seal，independent of direction of rotation.
Low risk of clogging in solids content or viscous liquids
Recommended Applications
Petrochemical industry and sewage treatment industry
Low solids content or viscous media
Sewage pumps, chemical pumps, screw pumps
Other Rotating Equipment.
Operating range
Shaft diameter: d1=20...80mm
Pressure: p=0...1.0Mpa（145psi）
Temperature: t = -40 °C ...150 °C(-40°F to 302°F)
Sliding velocity: Vg≤10m/s（32.8ft/m）
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials
Product Structure
Combination Materials
1. Rotary Face
Silicon carbide (RBSIC) O
Tungsten carbide W1
2. Stationary Seat
Silicon carbide (RBSIC) O
Carbon graphite resin impregnated Ak
Tungsten carbide W1
3. Auxiliary Seal
Fluorocarbon-Rubber (Viton) V
Ethylene-Propylene-Diene (EPDM) E
4. Spring
Stainless Steel (SUS304) F
Stainless Steel (SUS316) G
5. Metal Parts
Stainless Steel (SUS304) F
Stainless Steel （SUS316) G
Stationary Seat
Standard Seat: T5A
Alternatives Seat: T4A
Review
- Loading...
Please send your message to us
If you have any questions please ask here. TNG® needs the contact information you provide to us to contact you about our products and services. For information on our privacy practices and commitment to protecting your privacy.
- Tel
- *Title
- *Content
Do you need any further information?
Please send your message to us
If you have any questions please ask here. TNG® needs the contact information you provide to us to contact you about our products and services. For information on our privacy practices and commitment to protecting your privacy.
- Tel
- *Title
- *Content